Minwax 63005 1 qt Clear Semi-Gloss Oil-Based Polyurethane - Fast-Drying Formula

• Minwax Polyurethane Wood Finish protects interior projects like woodwork, furniture, floors and cabinets
• Oil-based clear top coat is one of the most durable coatings for wood protection against scratches, spills and more
• Clear finish provides long-lasting protection and warm beauty to both finished and unfinished wood projects
• Protective coating is ideal for woodwork, furniture, doors, cabinets and floors
• Fast-drying clear coat allows for quick recoats after 3-4 hours

Keep interior wood projects looking beautiful with Minwax Polyurethane Wood Finish. This oil-based clear sealer protective coating protects and adds long-lasting beauty to woodwork, furniture, doors, cabinets and floors. The clear top coat is one of the most durable coatings for wood protection against scratches, spills and more. It can be used on both finished and unfinished wood projects, and is available in a variety of sheens. The fast-drying formula allows for quick recoats in 4-6 hours. Application Directions: 1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter. 2. Sand to obtain a smooth uniform surface. Remove all dust with a cloth dampened with mineral spirits. 3. If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and dry times. 4. Stir Minwax Fast-Drying Polyurethane before and during use to eliminate settling on the bottom of the can. Stir to rotate the product from the bottom to the top of the can. NEVER SHAKE. 5. Apply a THIN coat of Minwax Fast-Drying Polyurethane using a high-quality natural or foam brush. 6. For floor projects, use a square buff orbital or disk-type sander with 220 grit sandpaper or the equivalent grit pad or screen (specifically designed for sanding between coats). Do not use a belt or drum-type sander for sanding between coats. Follow the sander manufacturer’s directions for your type of project. 7.Apply second coat. If third coat is desired, repeat step 6 before application. 8. After final coat, allow 24 hours before light use.

Stir the polyurethane finish well before use. Apply the finish with a high-quality synthetic bristle brush, foam brush, or cloth in the direction of the wood grain. For best results, apply a thin first coat and allow it to dry for the recommended time (usually 3-4 hours). Sand the dried first coat lightly with 220-grit sandpaper to ensure a smooth surface. Remove sanding dust with a damp cloth. Apply subsequent coats, allowing each coat to dry and sanding between coats if desired. After the final coat, allow the finish to cure for 24 hours before use.